$49.00
In Stock

Calculate Shipping



Express Shipping - $24.99 (ETA: 4 days)

Regular Shipping - $15.00 (ETA: 6 days)

Clover Hot Large Hemmer Ruler Pressing Tool 4" x 14" Quilting Sewing Craft DIY - 7814

 

The Clover Hot Hemmer Ruler in the 4" x 14" rectangle format is the long-format pressing companion from one of the world's most trusted sewing tool brands. Lay it on the ironing board, fold the fabric over the marked measurement line, and press with the iron directly on the heat-resistant surface — producing a crisp, even, perfectly measured fold along the full 14" length in a single pass. For quilters pressing binding strips, borders and sashing, and for sewers pressing long hems, waistbands and cuffs, the rectangular format covers more length per press and gets the job done faster.

BUILT FOR LONG PRESSING TASKS The 4" x 14" format is purpose-built for the pressing tasks that the square 6" x 6" hemmer handles less efficiently — anything long and straight. A 14" pressing guide means fewer repositions when working along a quilt border, a skirt hem or a binding strip. Where a smaller tool might require three or four placements to press a full quilt binding length, the 14" ruler covers more ground per pass and produces a more consistent result because there are fewer join points where the fold depth might vary. For high-volume pressing tasks — lots of the same strip width, repeated consistently — the rectangular format is the practical choice.

THE QUILTING USE CASES In quilting, the 4" x 14" Hot Hemmer earns its place at several stages of a project. Pressing binding strips to the correct fold width before attaching them to the quilt edge — typically at 0.25" or 0.5" increments — is faster and more consistent with the hemmer than with pins and a ruler alone. Pressing sashing strips, border pieces and long flying geese units all benefit from a long pressing guide that holds the fold steady along the full piece. The 4" width accommodates the standard binding widths comfortably, and the 14" length handles most strip sizes without needing to reposition mid-piece.

THE SEWING USE CASES For dressmakers and general sewers, the 4" x 14" format is the natural tool for hems. Skirts, trousers, curtains, table linens and any long hemline benefits from a pressing guide that matches its length. Position the hemmer at the hem depth you need, fold the fabric over, press — then slide it along and repeat. The iron goes directly on the heat-resistant surface, setting the fold permanently without lifting and repositioning a separate guide. Cuffs, sleeve hems, waistbands, plackets and any pressed fold on a long edge are all handled cleanly and consistently with this format.

KEY FEATURES

  • 4" x 14" rectangle format — ideal for long hems, binding strips, borders and sashing
  • Heat resistant — iron can be placed directly on the surface, dry or steam
  • Measurement markings — fold to an exact depth consistently along the full length
  • 14" length — fewer repositions, more consistent results on long pressing tasks
  • Suitable for quilting, patchwork, dressmaking, home sewing and crafts
  • By Clover — premium Japanese sewing tools, trusted by sewers worldwide

SQUARE OR RECTANGLE — WHICH HOT HEMMER? EzyShop stocks both Clover Hot Hemmer formats. The 6" x 6" square (7813) excels at quilting block pressing, mitred binding corners and any task where square geometry matters — the 90-degree corners are exactly right for quilt blocks and binding points. The 4" x 14" rectangle (this product, 7814) excels at long continuous pressing tasks — binding strips, borders, long hems, sashing and any fold that needs to be consistent over a length. Many sewers and quilters own both: the square for corner and block work, the rectangle for strip and hem work. If you can only choose one and you primarily quilt, the square. If you primarily sew garments or press long pieces, the rectangle.

ABOUT CLOVER Clover Mfg. Co., Ltd. is a Japanese manufacturer with decades of expertise producing premium sewing, quilting and needlecraft tools. Clover products are recognised globally for their quality, precision and thoughtful design — used by professional sewers, quilters and textile artists who will not compromise on their tools.

Ships Australia-wide via Australia Post. Fast dispatch from our Australian warehouse.

 

(BIR78148)

SKU BIR78148
Model # 7814
Barcode # 051221778148
Brand Clover
Unit Of Measure ea
Type Pressing Tool
Format 4" x 14"

Be The First To Review This Product!

Help other Ezy Shop Online users shop smarter by writing reviews for products you have purchased.

Write a product review

We Also Recommend


You May Also Like


Others Also Bought


More From This Category